DINGLI JCPT2223RT Operators Manual With Maintenance Information Download

Page: 42 / 74

OPERATOR

’S MANUAL

with Maintenance Information

Transport and Lifting Instructions

Observe and Obey:

√

Only qualified riggers should rig and lift the

machine.

√

Be sure the crane capacity, loading

surfaces and straps or lines are sufficient to

withstand the machine weight. See the

serial plate for the machine weight.

Lifting Instructions

Fully lower the platform. Be sure the extension

decks, controls and covers are secure.

Remove all loose items on the machine.

Determine the center of gravity of your

machine using the table and the picture on this

page.

Attach the rigging only to the designated lifting

points on the machine. There are two lifting

points on each end of the machine.

Adjust the rigging to prevent damage to the

machine and to keep the machine level.

Center of gravity

X Axis

Y Axis

DS2223RTA

1.7m

1.3m

X Axis

Summary of Contents for JCPT2223RT











































































Search results

Summary of Contents for JCPT2223RT

Reviews:

Related manuals for JCPT2223RT

Brands by name

Popular brands

DINGLI JCPT2223RT, Operators Manual With Maintenance Information

Search results

Summary of Contents for JCPT2223RT

Reviews:

Related manuals for JCPT2223RT

Brands by name

Popular brands