OPERATOR
’S MANUAL
with Maintenance Information
Control Panel
17
Platform Control Panel
1 Red Emergency Stop button
Push in the red Emergency Stop button to
the off position to stop all functions. Pull out
the red Emergency Stop button to the on
position to operate the machine.
2 Drive function select button
Press this button to activate the drive
function.
3 Power platform button
Press and hold this button to activate the
platform extendable / retractable function.
4 Engine idle select button
Press this button to select the engine idle
setting. Light flickering indicates high idle is
selected, Light off indicates low idle is
selected.
Press this button and hold on, the engine
would be turning in highest speed, no matter
a function action is chosen or not; once
released, it return back to turn in idle speed.
5 Horn button
Press this button and the horn will sound.
Release the button and the horn will stop.
6 Differential lock enable button
Press and hold this button to activate the
differential lock function.
7 Outrigger function enable button
Press this button to activate the individual
outrigger up/down function.
8 Outrigger auto level button
Press this button to activate the auto level
function.
9 Steer mode select button
Press this button to select steer mode: FS
mode (Front Steer mode), AS mode (All
wheel Steer mode), CS mode (Crab
Steer mode).
10 LED readout screen
Diagnostic readout and steer mode.
11 Engine start / flameout button
Press this button to start/ flameout the
engine.
12 Generator select button (if equipped)
Press this button to turn the generator
on. Indicator light will be on. Press the
button again to turn the generator off.
13 Lift function select button
Press this button to activate the lift
function.
14 Proportional control handle
Lift function: Press and hold the function
enable switch to enable the lift function
on the platform control handle. Move the
control handle in the direction indicated
by the blue arrow and the platform will
raise. Move the control handle in the
direction indicated by the yellow arrow
and the platform will lower. The descent
alarm should sound while the platform is
lowering.
Drive function: Press and hold the
function enable switch to enable the
drive function on the platform control
handle. Move the control handle in the
direction indicated by the blue arrow on
the control panel and the machine will
move in the direction that the blue arrow
points. Move the control handle in the
direction indicated by the yellow arrow
on the control panel and the machine
will move in the direction that the yellow
arrow points.
Outrigger extendable / retractable
function: Press and hold the function
enable switch
to enable the Outrigger
extend/ retract function on the platform
Summary of Contents for JCPT2223RT
Page 3: ......
Page 17: ...OPERATOR S MANUAL with Maintenance Information Decals 12 ...
