Dinel CLM-36, Instruction Manual

Page: 21 / 28

20
© Dinel, s.r.o. CLM–36
17 . s
pecification
t
echnical specification
(variants N, NT)
Supply voltage
CLM – 36N(T)–_ _–_–I
CLM – 36N(T)–_ _–
_–U
9 ... 36 V DC
16 ... 36 V DC
Current output
Voltage output 4 ... 20 mA
0 ... 10 V
Power consumption (off-load) CLM–36N(T)–_ _– _–U approx. 8mA
Sensitivity ranges
20 ; 30 ; 50 ; 100 ; 150 ;
300 ; 500 ; 1000 pF
Initial capacity regulation ratio min. 1:2
Nonlinearity max. 1 %
Temperature error max. 0,05% / K
Voltage error for current and voltage output max. 0,3 μ A/V and 0,1 mV/V
Internal resistance / Electric strength (Electrode – Housing) 1 M Ω / 250 V AC
Coupling capacity / Electric strength (Housing – Supply leads) 51 nF / 250 V AC
Protection
class
Standard
Optional (Connector GAN-DADE 7A / DAEE 7A) IP67 (Housing), IP65 (Connector)
IP67
Maximal load (serial) resistance for current output (U = 24 V) R
max
= 750 Ω
Minimal load resistance for voltage output R
min
> 1 k Ω
Maximum tensile strength of the rope electrode 1400 kg
Recommended cable PVC 2x0,75 mm
2
(3x0,5 mm
2
)
Weight (exclude electrode)
Version N, Xi
Version NT, XiT
approx. 0,5 kg
approx. 1 kg
e
lectrical paraMeters
(variants Xi, XiT)
Supply voltage 9 ... 30 V DC
Max. internal values
Ui = 30 V DC; Ii = 132 mA;
Pi = 0,99 W; Ci = 370 nF;
Li = 0,9 mH
Internal resistance / Electric strength (Electrode – Housing) 1 M Ω / 250 V AC
Coupling capacity / Electric strength (Housing – Supply leads) 26 nF / 500 V AC
Allowed temperature range in zone 0 (EN 50284) -20 ... +60°C
Allowed pressure range in zone 0 (EN 50284) 0,08 ... 0,11 MPa
p
rocess connection
Type Size Marking
Metric thread M36 x 2 M
Pipe thread (except CLM–36–40) G 1" G
Pipe thread for CLM–36–40) G 1½" G
Tri-clamp (standards DN 20) – Cl