Power Travel
(Optional)
If your saw is equipment with an optional power travel
manifold:
1. Set the feed speed control knob to set the
maximum speed that you would like to feed the
saw along the track.
2. Move the directional control lever in the direction
you would like the saw to travel.
Note: To stop the saw, position the directional control
lever vertical or turn the feed speed knob clockwise
until the saw stops.
The power travel comes with a priority flow manifold
that includes a pressure relief valve. This will stop the
saw from feeding when it hits an obstruction such as
a track safety stop or if a blade should get pinched in
a cut.
8
Pressure QD from
Priority Flow Control
Manifold
Directional Control
Lever
Feed Speed Control Knob
Summary of Contents for Dimas WS 460
Page 1: ......
