Introduction
WS 400 is a series of completely new wall saws from Dimas.
The intention when developing the DIMAS WS 400 series
was to produce a light weight yet powerful wall saw that
is easy for one person to handle. This is achieved by using
modern production methods and high performance
materials.
Among the new features of the WS 400 series is the
possibility to secure the blade radially on the saw. The
saw unit is mounted on a carriage using a quick-action
mounting bracket in addition to directly on the track,
assembly of the saw is significantly easier.
The 360° cutting arm of the WS 400 series has been
moved 2.5” closer to the track which significantly reduces
the stresses on the saw and track.
The reduction of stress has enable Dimas to further
optimize the wall saw and make it extremely compact. In
addition to the compact design, the efficiency of cutting
and the power applied at the cut has been increased.
These innovations will help the operator save time during
setup, cutting and tear-down.
6
Complete saw equipment consist of:
Saw Carriage
Saw Head
Track 90” (2.3m)
Track 40” (1m)
Five standard Track Brackets with Track Risers
Blade Guard 32” (800mm) or one Blade Guard 40”
(1000mm) (depending on customer order)
Blade Guard Guide
Tool Kit
Dimas Oil 150
As a large part of the sawing work consists
transporting, the saw equipment is supplied in
specially produced cases. The cases provide good
protection during transport and reduced the number
of packages that need to be moved between the
workplaces, which makes the work more efficient.
Summary of Contents for Dimas WS 460
Page 1: ......
