EDXtreme User Instructions
37
4.
Select a parity value using the
Sel
keys to scroll through your choices.
Choices are none (default), odd and even. Press
Enter
to accept the setting.
The following display appears:
5.
Select a databit value using the
Sel
keys to toggle between the two choices; 7
or 8 (default). Press
Enter
to accept the setting.
The following display appears.
6.
Select a mode of communication you want using the
Sel
keys to scroll through
these choices;
Continuous
,
Poll
,
Remote
and
Print Key Only
. Press
Enter
to
accept the setting.
If you choose
Continuous
, you will be prompted to select a print format
for the transmission and a rate at which you want to send the
transmission.
If you choose
Poll
you will be prompted to enter a poll character. Enter
the ASCII value of the poll character.
Choose
Remote
for wireline communications to the Communicator.
Choose
Print Key Only
to print only when the
key is pressed.
7.
Press
ESC
to return to the first soft key set of the Configuration menu.
Default Serial Communications
Baud Rate = 9600
Parity =
None
Databits =
8
Stop bits =
1
There is no option for handshakes. All settings should be None.
Summary of Contents for EDXtreme
