Dillon EDXtreme, User Instructions

Page: 13 / 68

EDXtreme User Instructions 11
2 Introduction
The EDXtreme
TM
(EDX) electronic dynamometer from Dillon is a force measurement
load sensor and digital readout in one instrument. The EDX can be used to measure
tension or weight. It can operate stand-alone or be coupled with a remote Dillon
Communicator, via radio communication or direct wire connection, for improved
convenience, functionality and safety.
This manual covers the setup and operation of the EDX and optional Communicator.
General information is covered in the right column of each page with major sections
separated by the black bar shown above. Subheads appear in the left column along
with any special notes, cautions or warnings.
This manual covers the following:
l
EDX & Communicator Description
l
EDX Setup, Configuration and Operation
l
Communicator Setup
l
General Information on the EDX
l
Troubleshooting
Be sure to read the safety precautions found in Safe Operation on page 4 .
2.1 EDX Front Panel
The EDX comes in several weight capacities. All have the same front panel, shown in
Figure
2.1 .
Figure 2.1 EDXtreme Front Panel
WARNING: If you overload this dynamometer you could suffer severe injuries
or death. The total load on the dynamometer should NEVER exceed the rated
capacity.