The information displayed here are updated every second, and here are
descriptions of every item:
Status
Display the SSID and BSSID of connected wireless
access point or wireless device (displayed as SSID
<-> BSSID as shown in above picture. If there’s no
active connection currently, ‘Disconnected’ will be
displayed here.
Extra Info
Displays the link status (‘Link is up’ or Link is
down’, and the radio transmitting power of your
network card.
Channel
Displays the radio channel being used now.
Link Speed
Displays the link speed of data transmitting (Tx, in
Mbps) and receiving (Rx, in Mbps). Link speed is
the maximum available data transfer speed of the
wireless connection, and depends on the radio
signal quality of wireless connection.
Throughput
Displays the rate of data transmitting (Tx, in Kbps)
and receiving (Rx, in Kbps).
Link Quality
Displays link quality (radio signal quality). When
the link quality is better, the wireless link speed will
be better, too. Link quality is displayed by
percentage and a descriptive word (Good, normal,
weak, and low).
Signal Strength 1
Displays the radio signal strength of built-in
antenna 1.
Signal Strength 2
Displays the radio signal strength of built-in
antenna 2.
Noise Level
Displays the percentage or level of noise (unusable)
signal. If the value of this item is high, data transfer
