background image

 

 
 

 

PISO-P8R8U/P16R16U 

PEX-P8R8i/P16R16i 

 

User Manual 

 
 
 
 
 
 
 

Warranty

 

All products manufactured by ICP DAS are warranted against defective 

materials for a period of one year from the date of delivery to the original purchaser. 
 

Warning 

ICP DAS assumes no liability for any damage consequent to the use of this 

product. ICP DAS reserves the right to change this manual at any time without notice. 
The information furnished by ICP DAS is believed to be accurate and reliable. 
However, ICP DAS assumes no responsibility for its use, nor for any infringements of 
patents or other rights of third parties resulting from its use. 
 

Copyright

 

Copyright © March 1998~2008 by ICP DAS. All rights are reserved. 

 

Trademark

 

The names used in this document are for identification purposes only may be 

registered trademarks of their respective companies. 
 

License

 

The user can use, modify and backup this software on a single machine. The 

user may not reproduce, transfer or distribute this software, or any copy, in whole or 
in part. 

PISO-P8R8U/P16R16U/PEX-P8R8i/P16R16i  User Manual  (Ver.1.6, Mar/2010, PMH-021-16)    -

1

-

 

Summary of Contents for PISO-P8R8U












































Reviews: