5. Windows SDK
Please read the release notes first to determine the location of the Windows SDK
(DLL and OCX) on the enclosed ICP DAS CD, then run the setup program, found in
the Windows SDK folder to install the DLL driver and OCX controls onto your
computer. The setup program will guide you through the installation procedures step-
by-step.
Note:
It is recommended to install the software first, and then plug the card
into the computer. This reduces the Windows Plug & Play
procedures.
All source code for the VB/VC/Delphi and BCB sample programs are provided in
enclosed CD or on the web site for free download.
5.1. PIO_PISO.EXE Program
PIO_PISO.exe diagnostic
program can be used to identify all
PIO/PISO series cards currently
installed in the PC, and can be
useful for checking whether the
cards are correctly installed in the
PCI slot.
The following information is also
displayed:
1. The model number of all cards
found.
2. The I/O address and IRQ
number of each card.
3. The bus and slot number of
each card.
Note:
The corresponding Windows driver for the card must be installed first.
PISO-P8R8U/P16R16U/PEX-P8R8i/P16R16i User Manual (Ver.1.6,Mar/2010, PMH-021-16) -
35
-
