4. DOS SDK
Please read the release notes to determine the location of the DOS SDK on the
included CD (or floppy disk), then run the “install.bat” batch file, under the DOS SDK
folder, to copy the software onto your hard disk.
Note:
The DOS SDK has read-only file attribute if they are stored on CD.
After installing/coping the software, users have to remove the read-
only attribute before any modification, compiling or linking with these
sample program files. Please use the following command to change
it:
Attrib –R *.* /S /D
The source code of TC/BC and MSC sample programs are included in DOS SDK.
4.1. PIO_PISO.EXE Program
The PIO_PISO.exe diagnostic program can be used to identify all PIO/PISO
series cards currently installed in the PC, and can be useful to check whether the
cards are correctly installed in the PCI slot.
Note:
The PIO.Lib (for DOS) library file is available for all PIO and PISO
series cards, but there are different versions for TC, BC and MSC.
Ensure that the correct version is used.
Card_1: wBase=ec00,wIrq=b,subID=[1800,0,30],SlotID=[0,f] --> PISO-P16R16U
Card_0: wBase=e800,wIrq=5,subID=[c080,1,40],SlotID=[0,d] --> PIO-D24/D56
------------------------------------------------------------------------
There are 2 PIO_PISO Cards(s) in this PC, RetVal:0
*** PIO_PISO.EXE Rev. 2.32, Dec.23, 2005 ***
The diagnostic program also shows the following information:
1. The model number of each card.
2. The I/O address and IRQ number of each card.
3. The bus and slot numbers of each card.
PISO-P8R8U/P16R16U/PEX-P8R8i/P16R16i User Manual (Ver.1.6,Mar/2010, PMH-021-16) -
25
-