1.4. Unpacking the Hardware
This I/O card was thoroughly tested and inspected, both mechanically and
electrically, before shipping. It was free of marks and scratches and our delivery
quality policy requires that all equipment be in perfect condition before delivery.
However, some unintentional damage may occur while unpacking. Please read
this section before unpacking the card. Feel free to contact your supplier and
retain your shipping carton in case there are any errors.
CAUTION:
This card contains sensitive electronic components that can be
easily damaged by static electricity.
1. This card should be unpacked using an anti-static mat.
2. The user should wear an anti-static wristband, grounded at the same point as
the anti-static mat.
3. Inspect the carton for obvious damage. Either shipping or handing may cause
damages. Be sure there is no shipping or handing damage on the card before
using.
4. After opening the carton, place the system board handle on a grounded anti-
static surface with the component side face up.
CAUTION:
Do not apply power to the board if it has been damaged!
1.5. Order Information
•
PISO-P8R8U & PEX-P8R8i
8-channel isolated digital input, 8-channel relay output board
•
PISO-P16R16U & PEX-P16R16i
16-channel isolated digital input, 16-channel relay output board
Options
•
DN-37: I/O connector block with DIN-Rail mounting and 37-pin D-type connector
•
DB-37: 37-pin D-type connector pin-to-pin screw terminal for any 37-pin
D-type I/O board connector
PISO-P8R8U/P16R16U/PEX-P8R8i/P16R16i User Manual (Ver.1.6, Mar/2010, PMH-021-16) -
10
-