PISO-P8R8U/P16R16U/PEX-P8R8i/P16R16i User Manual (Ver.1.6,Mar/2010, PMH-021-16) -
26
-
4.2. Error Codes
There are several error codes that may be returned when using function calls
listed below. A description of each error code is as follows:
Code Description
0
No error found.
3
The specified hardware ID cannot be found. To resolve this error, either
A. Ensure that the Sub-Vendor, Sub-Device and Sub-Aux ID values are all
correct.
B. Try using a different PCI slot.
C. Ensure that the 3.3 V/5 V jumper setting is correct.
5
The specified board number is incorrect.
The board number must be between 0 and Total Boards –1.
6
Refer to error code 3.
4.3. Lib Functions
All Lib functions and descriptions are listed in the following sections. In this
chapter, keywords are used to indicate the attributes of each parameter.
Keyword Description
[In]
The parameter must be initialized, or have a value set before calling this
function.
[Out]
The parameter will return a value or other data after this function is called.
Note: All parameter spaces/buffers must be allocated and then freed by the
user application programs.
