ICP DAS USA PCI-1202L User Manual Download

Page: 1 / 123

PCI-1202/1602/180x

Series Card User Manual

Multi-Function Boards

Version 4.8, Mar. 2015

UPPORTS

Board includes PEX-1202L, PEX-1202H, PCI-1202L, PCI-1202H, PCI-1202LU,

PCI-1202HU, PCI-1602, PCI-602F, PCI-1602U, PCI-1602FU, PCI-1800L, PCI-1800H,

PCI-1800LU, PCI-1800HU, PCI-1802L, PCI-1802H, PCI-1802LU and PCI-1802HU.

ARRANTY

All products manufactured by ICP DAS are warranted against defective materials for a

period of one year from the date of delivery to the original purchaser.

ARNING

ICP DAS assumes no liability for damages consequent to the use of this product. ICP

DAS reserves the right to change this manual at any time without notice. The

information furnished by ICP DAS is believed to be accurate and reliable. However, no

responsibility is assumed by ICP DAS for its use, nor for any infringements of patents

or other rights of third parties resulting from its use.

OPYRIGHT

RADEMARK

Names are used for identification only and may be registered trademarks of their

respective companies.

ONTACT

If you have any question, please feel to contact us. We will give you quick response

within 2 workdays.

Email: [email protected], [email protected]

Summary of Contents for PCI-1202L




























































































































Search results

Summary of Contents for PCI-1202L

Reviews:

Related manuals for PCI-1202L

Brands by name

Popular brands

ICP DAS USA PCI-1202L, User Manual

Search results

Summary of Contents for PCI-1202L

Reviews:

Related manuals for PCI-1202L

Brands by name

Popular brands