Here are descriptions of every setup items:
Wireless mode
Select wireless operation mode, available options
are 802.11 B/G mix, 802.11 B only, and 802.11
B/G/N mix. You can select 802.11 B/G/N mix to
maximize wireless compatibility with wireless
access points and other wireless devices. Anyway,
you can set this setting to ‘802.11 B only’ when
you’re going to communicate with old 802.11b
wireless devices and you got problem using other
two modes.
Wireless
This setting helps your network card to avoid
Protection interference
with
other wireless devices when there
are both 802.11b and 802.11g wireless devices in
the same place. It’s recommended to set this setting
to ‘Auto’ , since enabling this setting will slightly
reduce the data transfer performance.
Tx BURST
Check this box to accelerate the data transmit rate.
It may not work with all wireless access point and
wireless devices.
Enable TCP
Check this box and the configuration utility will
Window Size
adjust TCP window size automatically, to get better
performance. It should be safe for most of wireless
environments, but if you found some problem on
data transfer, uncheck this box.
Fast Roaming at
Check this box and you can adjust the threshold of
when this wireless network card should switch to
another wireless access point with better signal
quality. Only adjust value when you understand
what it means.
Turn off RF
Click this button to switch wireless radio off, click it
again switch wireless radio on.
Select Your
Select the country / region code of the place you’re
