background image

 

 

PISO-1730U Card   
User Manual 

32-ch Optically Isolated DIO Board (Sink, NPN)            Version 1.2, Jan. 2015 

 
 

S

UPPORTS

 

Board includes PISO-1730U.

 

 

W

ARRANTY

 

All products manufactured by ICP DAS are warranted against defective 
materials for a period of one year from the date of delivery to the original 
purchaser. 

 

W

ARNING

 

ICP  DAS  assumes  no  liability  for  damages  consequent  to  the  use  of  this 
product.  ICP  DAS  reserves  the  right  to  change  this  manual  at  any  time 
without  notice.  The  information  furnished  by  ICP  DAS  is  believed  to  be 
accurate and reliable. However, no responsibility is assumed by ICP DAS for 
its use, nor for any infringements of patents or other rights of third parties 
resulting from its use.

 

 

C

OPYRIGHT

 

Copyright ©  2013 by ICP DAS. All rights are reserved. 

 

T

RADEMARK

 

Names are used for identification only and may be registered trademarks of 
their respective companies. 

 

C

ONTACT 

U

S

 

If you have any question, please feel to contact us. We will give you quick 
response within 2 workdays.   
Email: [email protected][email protected]   

Summary of Contents for PISO-1730U







































Reviews: