Digitronic
Digital Cam Switch Unit
Automationsanlagen GmbH
CamCon DC16
7.3.14. Deleting programs
If you want to erase a whole program, you have to press the
key to enter the input of the output
number. Skip it by pressing the
key, and you enter the program selection for programming.
Enter the number of the program that you want to delete with the numeric keys. Press
and the
display shows the security precaution question for the deletion of programs. Move the cursor to "
yes
"
with the
key, and press the
key to delete the program.
7.3.15. Copying programs
With the CamCon you also copy whole programs. This is done as follows:
1.
Press the
key, the cursor moves to the input of the output number.
2.
Press the
key, the cursor moves to the input of the program number.
3.
Select the program you want to copy using the numeric keys.
4.
Press the
key to confirm your selection.
5.
Press the
key, the cursor moves to the input of the output number.
6.
Press the
key, the cursor moves to the input of the program number.
7.
Using the numeric keys, select the program onto which you want to copy the previously selected
program.
8.
Press the
key, to start the copying process. The display shows the question:
9.
Move the cursor to "
yes
" with the
key and press the
key to confirm your input.
This finally initializes the copying process, and after a short while the new program appears on the
display.
Version: Aug. 04
Page: 38
