Digitronic
Digital Cam Switch Unit
Automationsanlagen GmbH
CamCon DC16
7.4.7. Masterprogram
Having selected "
Masterprogram
" in the menu "
system config
" you will get to the following display.
.
or.
Here you are able to define Cams for different products and programms. They could be necessary if
your plant produces different types of products that have only very little differences concerning their
Cam-adjustement. You are able to save a lot of storage for Cams (EE-Prom), because these
mastercams do not need to be programmed multiple.
If you wish to use this funktion, at first the "Mastermodule"
must be switched "
on
" using key
, that has to be
confirmed by pressing
.
Now enter the masterprogramnumber by wich the
Mastercams will be saved. You can use every
programnumber from 0 to 32767.
Having confirmed the masterprogramnumber by pressing
, you have to define which Output or Camtrack shall be
used as Mastercam.
Here you can switch the outputs acess to the
masterprogram on (YES) or off (NO) by pressing
and
The keys
and
are used to select the
favoured Outputmuber or Camtrack. Pressing
quits
the input.
Example:
Having adjusted the masterprogramnumber 32767 on and switched output 1 on YES, a Cam in
Program 32767 programed for output 1 will be also editet, if automaticprogram is set to 0. Cams in
Programm 0 programed for output 1 will be ignored though.
To program a Mastercam, switch to menu
"programing"
and choose your favoured outputnumber. If
you are not in the Masterprogram while putting in Cams, the system automatically switches to
Masterprogram so that you can change a Mastercam.
Note:
In putting in Cams in the
"Programing"
-menu the only posibility to change Mastercams, if
your logged in with an user key, that has acess to "
System config
". This disables a user
at the plant to change MasterCams. The procedure of the plant can therefore only be
changed by a person that has the essential acess-key-code.
Note:
If choosing the Masterprogram to program Cams, only MasterCams may be changed.
Note:
If an automatic-program is set on the Masterprogram's number, only the Cams
programed by Masterprogram will be put out.
Version: Aug. 04
Page: 64
