Digitronic
Digital Cam Switch Unit
Automationsanlagen GmbH
CamCon DC16
7.3.17.1. Creating the first analog cam
To program your first analog cam, choose the program and the desired output for programming (see
chapters: "7.3.2. Program selection for programming" and "7.3.1. Output selection for programming").
Press the
key and enter the position value for the first definition point. Now press the
, enter the
analog value and confirm your input with the
key.
Note:
As long as only one cam is programmed on a cam track, the programmed analog value is
emitted for the whole way of the measuring system.
7.3.17.2. Adding an analog cam
To add another definition point, choose a desired output, press the
key and enter a new position
value. Press the key
, enter the analog value and confirm your input with the
key.
Further cams are added with the same procedure.
7.3.17.3. Changing the analog cam
To change or delete an analog cam, proceed as described in chapters "7.3.9. Cam Search", "7.3.10.
Cam deletion" and "7.3.11. Output (cam track) deletion".
Note:
The programming of a delay time, the copying of an analog cam track and the shifting of
the complete cam track is not possible at the time.
Version: Aug. 04
Page: 43
