60
• Press Function key 2. The display reads:
• Press Function key 1. The display reads:
• Press the <RIGHT> Cursor key. The display reads:
• To change the CC pedal transmit channel numbers, press the
appropriate Function key to select whether you want to change
the setting for the internal or external pedal and use the
<UP / DOWN> Cursor keys or the Data wheel to change the
Channel as desired.
• Press the <RIGHT> Cursor key again. The display reads:
• The footswitches which have been assigned with toggle CC
functions also have a selectable MIDI channel. This allows the
CC pedal to control a different external MIDI device than the
toggle CC footswitches.
In order for the external units to respond to CC messages you’ve set
up to transmit out the Valve FX MIDI Out port, it is necessary to set
them up to respond to the same MIDI Channel and CC numbers that
you’ve just set.
PEDAL CALIBRATION
The next step is calibrating the CC pedal(s) so that the Valve FX
knows what ranges of control the pedal(s) can generate. Calibrating
CC pedals allows the Valve FX to handle CC messages with the great-
est efficiency and smoothness. Calibration procedures are the same
for both the Control One’s internal (built-in) continuous control pedal
and the external pedal that connects to the Valve FX. Although cali-
bration is not required everytime the Valve FX is powered up, it is a
good idea to calibrate regularly to insure pedal accuracy. The proce-
dure is as follows:
¡Toggle Transmit
≤
Channel
1
¡Int Xmit:Ch
1
≤™Ext Xmit:Off ≥
¡IntPedal:CC 4
™ExtPedal:CC 16≥
¡Assign Pedal CC
™Calibrate Pedal
Section 5 - The Utility Menu
Valve FX Owner’s Manual
