45
• Press Function key 1 once. The display reads:
Note that a cursor appears under the
MIDI Channel
num-
ber.
• Using the <UP>/<DOWN> Cursor keys, Function key 1, or the
Data wheel select the channel on which you want the Valve FX
to receive MIDI data.
• To exit, press the <UTILITY> button once.
SEND PRG (PROGRAM CHANGE)
Send Prg
determines whether or not corresponding Program
Changes will be sent out the Valve FX MIDI port as you select
Programs. This Parameter is either
On
or
Off
but will be ignored
by the Valve FX if all the Devices in the Program Send Map are dis-
abled. The procedure is as follows:
• Press the <UTILITY> button once. The display reads:
• Press Function key 1 once. The display reads:
Note that a cursor appears under the
MIDI Channel
num-
ber.
• Press Function key 2 once. The cursor appears under
Off
.
• Using the Parameter <UP>/<DOWN> Cursor keys, turn the func-
tion on or off. When you’re finished, press the <UTILITY> button
once and you will be returned to your original position in the
Program, or press <EXIT> to return to the previous Utility setup
menu.
PRG SEND MAP
Device mapping allows the Valve FX to act as a MIDI multiplexer for
up to four other devices. Here’s how it works: when you change from
the current Program, or the Valve FX receives a Program Change
message via MIDI, each device you specify can receive independent
Program Change messages on an individual MIDI channels. This fea-
ture can allow you to control up to four separate MIDI devices with
MIDI information received upline on one MIDI channel. If all four
¡MIDI Channel:
1
™Send Prg: Off ≥
¡MIDI Contrst:
4
™Foot £Tuner ≥
¡MIDI Channel:
1
™Send Prg: Off ≥
Section 5 - The Utility Menu
Valve FX Owner’s Manual
