The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
26
AITP application
This System application is necessary to update the A.I.T.P firmware.
Firmware update can be done either manually or automatically.
To manually update the firmware, you have to copy the file received from Digitax to the ”\Hard
Disk\SysApps\Res” folder and manually run the AITPProg application.
To make an automatic update, simply copy or download ”On the Air ” the firmware file to the ”\Hard
Disk\SysApps\Box” folder. The next time the MCU will be restarted, at start-up the firmware will be
automatically updated before running the user application.
After that, automatically updated firmware file is moved to the SysApp\Res folder.
This application is made as a ”control panel” to interface the A.I.T.P. processor.
It allows to view current setup, or to monitor all activities that are under control of the A.I.T.P.
Is useful both as a system application and as a sample application for developers, because it
completely uses the DLL interface modules provided by Digitax to simplify the application
development.
Special Digital I/O and Analog Input
It is used to monitor the actual status of Digital I/O and Analog Inputs.
