D-FORCE600VA SLIDING GATE OPERATOR
close time can be adjusted to between 12, 24 and 36 seconds.
Safe guard (Infrared photocell):
If infrared beam is interrupted
during closing, the gate will reverse and go open immediately. This
feature will not function if the gate is in fully opened and closed
positions or during opening.
Open priority:
The gate will return to open if press ‘OPEN’ button of
external button switch during closing.
Limit switch:
The switch is used to accurately stop the gate in the
opened and closed positions.
If the gate stops at opened position when the limit switch is reached,
the gate will not move if you press ‘OPEN’ button.
If the gate stops at closed position when the limit switch is reached,
the gate will not move if you press ‘CLOSE’ button.
The device is installed with a thermal protector, the thermal protector
will switch off the motor automatically in case of the temperature is
higher than 120°C and switch on the motor automatically when the
temperature is lower than 85°C±5 °C.
9.
LED indicate
a.
LED of Power indicated the input power.
b.
LED of LEARN indicated the transmitter learn status.
c.
LED 1 indicate the ‘CLOSE’ external button, if the
button is pressed the LED will light.
d.
LED 2 indicate the ‘OPEN’ external button, if the button
is pressed the LED will light.
e.
LED 3 indicate the ‘STOP’ external button, if the button
is pressed the LED will light.
f.
LED 5 indicate the ‘O/S/C’ external button, if the button
is pressed the LED will light.
g.
LED 6 indicate the ‘pedestrian switch’ external button, if
21
