D-FORCE600VA SLIDING GATE OPERATOR
7. Tuning and operation
a. Adjust the Adjustable resistance (see Fig.8)
VR1: For motor working total time adjustment.
Clockwise rotation to increase, counter-clockwise rotation to reduce. The to
tal time can be set to 10 seconds as minimum and 90 seconds as maximum.
VR2: For brake force adjustment in limit position.
Clockwise rotation to increase, counter-clockwise rotation to reduce. Rotate
to minimum to cancel brake function in place.
VR3: For slow stop width adjustment.
Clockwise rotation to increase, counter-clockwise rotation to reduce.
VR4: For motor output force adjustment to keep safe usage.
Clockwise rotation to increase, counter-clockwise rotation to reduce.
Warning: Motor force can not be set too large, just drive the door is ok.
Remote control
The remote control works in a single channel mode. It has four
buttons. See Fig.12 Remote transmitter. The function of button 1,
button 2
、
button3 are the same and button 4 is pedestrian mode.
With each press of the remote control button (1, 2 and 3) which has
been programmed, the gate will close, stop, open or stop cycle.
Remote Pedestrian button: After you learn the button 4, you press the
remote button 4 the door will open 1 meter when the door is closed.
You can program/learn button 1, button 2, button 3 and button 4
individually. You also can program/learn two buttons or three buttons
16
