Page 7 of 35
BUTTONS & DEMO MODES
•
Button switch – TS2 : Push TS2 to cycle between the 4 different demo modes (This function is activated when JP3 sets
OPEN only)
Mode 1 (default) = RIGHT demo mode, right side of screen with smoothed motion while left side without (a box with yellow
border appear on RIGHT hand side of screen);
Mode 2 = CENTRE demo mode, centre part of screen with smoothed motion while other areas without (a box with yellow border
appear in the CENTRE of the screen);
Mode 3 = whole screen without smoothed motion
Mode 4 = whole screen with smoothed motion
The controller will not memorize the demo mode after you power cycle the controller. It will resume back to mode 1 always.
* This function will not activate in static text mode (i.e : SW3 position 8 sets ON).
