Page 4.38
Rev C August 2009
4. Controlling the projector
Digital Projection
TITAN sx+600/700.
User Manuall
Notes
In single lamp modes:
- if the running lamp fails, the
other lamp will automatically be
switched on.
The selected lamp mode:
- will not be applied until
OK
is
selected
- will be applied gradually over a
period of 30 seconds
- will not be applied until the end
of any warm-up or cool-down
period that has already started.
Lamp power
Press
and
to select the Lamp Power setting.
Press
and
to adjust the Lamp Power from:
80 to 100%
in 1% steps
Lamp Mode
Press
and
to select Lamp Mode.
Press
and
to select from:
single lamp modes
Lamp 1
lamp 1 only
Lamp 2
lamp 2 only
Alternate
on power up, selects the lamp with the least hours used
dual lamp mode
Lamps 1 and 2
both lamps
OK
Press
and
to select OK.
Press
to apply the new settings.
Cancel
Press
and
to select Cancel.
Press
or
to exit without applying the new settings.
The indicators on the control panel will show as follows:
Lamp 1
off =
OFF
flashing red
= LAMP ERROR
green
= ON (100%)
amber
= (80 - 99%)
flashing green
= LAMP WARM-UP
flashing amber
= COOL-DOWN
Lamp 2
off =
OFF
flashing red
= LAMP ERROR
green
= ON (100%)
amber
= (80 - 99%)
flashing green
= LAMP WARM-UP
flashing amber
= COOL-DOWN
•
•
•
•
Setup menu, Lamp continued
Downloaded From projector-manual.com Digital Projection Manuals
