Digital Projection TITAN SX 600 User Manual Download Page 117

Page: 117 / 146

Rev C August 2009

Page 5.23

Digital Projection

TITAN sx+600/700.

User Manual

5. Userware

Notes

The

Discover page

is available

only on the

Standalone

version

of the Userware..

The Userware can be used to

control only one projector at a

time, and only one instance can

be running at one time.

The

Discover page

can be

used to switch control between

multiple projectors.

More than one computer can be

used to control more than one

projector on the same network.

Discover page

To see the

Discover page

, click on

Discover

If the projector that launched the Userware is still connected, then its

LAN IP

address

will be listed in the panel and marked

Online

Projector Connected

will be shown at the top left, together with the projector’s

Serial No

and

Model

Disconnect

Click on

Disconnect

to disconnect from the projector.

Projector Disconnected

will be shown at the top left.

Reconnect

Click on the

LAN IP address

to reconnect to the projector.

•

Downloaded From projector-manual.com Digital Projection Manuals

Summary of Contents for TITAN SX 600



















































































































































Search results

Summary of Contents for TITAN SX 600

Reviews:

Related manuals for TITAN SX 600

Brands by name

Popular brands

Digital Projection TITAN SX 600, User Manual

Search results

Summary of Contents for TITAN SX 600

Reviews:

Related manuals for TITAN SX 600

Brands by name

Popular brands