Page 4.36
Rev B September 2010
4. Controlling the projector
Digital Projection
TITAN 1080p 3D, Dual 3D. Ultra Contrast
User Manual
For important information about how Input 8 is used, see
INPUT 8
in the Notes column
, and also
Section 4, Overview
.
Notes
Keystone
adjustment can be
found in both the Geometry and
Projector Setup menus.
The
Keystone
adjustment is
NOT available for Input 8.
The range of adjustment will
be dependent on the input
resolution.
Some computer graphics cards
do not recognise the EDID
Extension block.
If you are having problems
booting a computer connected
to the projector:
turn the computer OFF
set
DVI EDID Extension Block
to
Disable
turn the computer back ON
again
•
•
•
Keystone
Used to correct for distortion caused by the projector being mounted higher or lower
than the screen.
Press
and
to select Keystone.
Press
and
to adjust the slider.
DVI EDID Extension Block
Press
and
to select DVI EDID Extension Block.
Press
and
to select from:
Enable
Disable
•
•
Setup menu, projector Setup continued
