Page 5.8
Rev B September 2010
5. Userware
Digital Projection
TITAN 1080p 3D, Dual 3D. Ultra Contrast
User Manual
For important information about how Input 8 is used, see
INPUT 8
in the Notes column
, and also
Section 4, Overview
.
Orientation
Click on
Orientation
to select from the drop down menu.
Input
Click on
Input
to select from the drop down menu.
Test Pattern
Click on
Test Pattern
to select from the drop down menu.
Aspect Ratio
Click on
Aspect Ratio
to select from the drop down menu.
•
•
•
•
Notes
For more information about
input modes, see
Overview
,
in section
4. Controlling the
Projector.
Input 8 and 3D may not be
present on some models
The signal from input 8 will
be displayed in 3D, only if
3D
Enable
is set to on: see
3D
Menu,
later in this section.
For more information about
test patterns, see
Setup menu
,
in section
4. Controlling the
Projector
.
For more information about
aspect ratios, see
Picture
menu
and
Geometry menu
,
in section
4. Controlling the
Projector
.
Show page continued
Orientation
Input
Test
Pattern
Aspect
Ratio
