Rev B. January 2010
Page 4.9
Digital Projection
LIGHTNING 1080p, 1080p 3D/UC
User Manual
4. Controlling the projector
For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4.
Notes
Many features are controlled
from the menus using the
menu
navigation keys
on the remote
control or keypad.
For more information about
using the menus, see later in
this section,
Using the menus
.
Some of the menu features, for
example brightness, contrast
and input preset operations, can
be accessed directly using the
control keys
at the bottom of
the remote control.
Other features, eg zoom and
focus, are controlled using the
control keys at the top of the
remote control and keypad.
For more information about
using the control keys, see
later in this section,
Using the
control keys
.
The
Lamp 2 indicator applies
only to Titan Dual models.
The control panel
Keypad layout
The controls on the keypad are identical to those at the top of the remote control,
and are described on the following pages.
Projector status indicators
The indicators on the control panel are as follows:
Power
off =
NO POWER
green
= normal RUNNING mode
amber
= STANDBY mode
Shutter
amber
= CLOSED
green
= OPEN
Error
off
= NO ERROR
flashing
= ERROR (temperature)
steady
= ERROR (voltage)
IR
blue flash
= Remote control command received
Lamp 1
off =
OFF
flashing red
= LAMP ERROR
green
= ON (100%)
amber
= (80 - 99%)
flashing green
= LAMP WARM-UP
flashing amber
= COOL-DOWN
Lamp 2
off =
OFF
flashing red
= LAMP ERROR
green
= ON (100%)
amber
= (80 - 99%)
flashing green
= LAMP WARM-UP
flashing amber
= COOL-DOWN
