Rev B. January 2010
Page 4.37
Digital Projection
LIGHTNING 1080p, 1080p 3D/UC
User Manual
4. Controlling the projector
For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4.
Setup menu, Projector continued
FastFrame
Used to reduce the artifacts and image blur typically associated with rapidly moving
images, by increasing the time the display is blanked between frames (dark time).
Press
and
to select FastFrame.
Press
to open the FastFrame submenu.
FastFrame On/Off
Press
and
to select Fastfame.
Press
and
to select from:
On
Off
Dark Time
Press
and
to select Dark Time.
Press
and
to adjust the slider.
•
•
•
•
Notes
Setup Menu
FastFrame
If
FastFrame is turned on, then
turning
3D Enable on will turn it
off.
When
3D Enable is on, it is not
possible to turn
FastFrame
on.
The optimum dark time setting
for a 60Hz frame rate is
approximately 8 to 10mS.