Rev B. January 2010
Page 4.19
Digital Projection
LIGHTNING 1080p, 1080p 3D/UC
User Manual
4. Controlling the projector
For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4.
Input menu
To return to the
main menu
, press
up to three times.
From the main menu:
Press
and
until Input is highlighted.
Press
to open the Input menu. The blue highlight moves to the first item in
the menu. The
symbol shows which input is currently selected.
Input Source
Press
and
to select from:
1. RGB1
2. RGB2
3. DVI (Single)
4. SDI
5. Composite Video
6. S-Video
7. Component
8. DVI (Single/Dual/Twin pixel-mapped)
Press
to confirm your selection.
•
•
•
Notes
Some menu controls can be
accessed directly using the
control keys (see earlier in this
section).
When using the menus, press
OSD
or
to hide or
reveal the On-Screen-Display.
Input Menu
For more information about
the input connections, see
section 2. Installation, and
section 7. Appendix
.
Input 8 and 3D may not be
present on some models
3D signals will be displayed
in 3D, only if
3D Enable
is set
to on: see later in this section,
Setup Menu, 3D
.
When an input has been
selected, the projector will
automatically detect input mode
settings such as line rate and
resolution etc.
To force the projector to re-
detect the input mode settings,
press
.