Hitachi CP-X265 User Manual – Operating Manual Download | Manualshive

Page: 1 / 66

background image

Projector

CP-X265

User's Manual – Operating Guide

Thank you for purchasing this projector.

WARNING

►

Before using this product, please read the "User's Manual -

Safety Guide" and related manuals to ensure the proper use of this product.
After reading them, store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are
described below.

WARNING

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.

CAUTION

This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect
handling.



Please refer to the pages written following this symbol.

NOTE

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not permitted

without express written consent.

Trademark acknowledgment

• VGA and XGA are registered trademarks of International Business Machines Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the properties of their respective owners.

1
2
3
...
»

Summary of Contents for CP-X265



































































Reviews:

No comments

Related manuals for CP-X265

Brand: Samsung Pages: 32

Brand: NEC Pages: 2

Brand: Optoma Pages: 57

Brand: Datavideo Pages: 84

Brand: Goclever Pages: 62

Brand: Barco Pages: 126

Brand: AV Stumpfl Pages: 10

Brand: Liesegang Pages: 58

Brand: SVS Pages: 16

Brand: Optoma Pages: 57

Brand: 3M Pages: 8

Brand: NEC Pages: 82

Brand: NEC Pages: 37

Brand: NEC Pages: 10

Brand: NEC Pages: 6

Brand: NEC Pages: 87

Brand: NEC Pages: 6

Brand: NEC Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands