background image

DIN RELAY 4

3

Maximum Terminal Torque

Use stranded wire only. Torque terminals to 20in-lbs max. 
 

Important Factory Defaults

DEFAULT IP ADDRESS AND LOGIN

The factory default IP address is 192.168.0.100  

User name: admin (lower case) 

Password: 1234

RESET PROCEDURE

You may want to take a backup of your settings first. To 

reset to default, gently depress the reset switch with a 

stylus and select a reset option. 
The display displays an overview of possible actions.  

Interrupt it by pressing UP/DOWN or CYCLE..

Use UP/DOWN to select a reset mode.  The selected 

mode is displayed on the second LCD line. Available 

modes are:

    • Clear lock bits 

• Reset Network and Scripting 

• Reset Network & Scripting, plus Enable WiFi 

• Complete wipe: - All settings will be lost 

• Complete wipe + Enable WiFi!

 Note: The last two 'wipe' modes enable the Subnet 

Restriction.  ONLY MACHINES IN THE SAME SUBNET 

WILL BE ABLE TO CONNECT AFTER RESET. If 

connectivity is lost, you may use a local connection 

such as a laptop to restore your original network 

settings.

 

Quick Setup 

Use these shortcuts for a quick installation: 
1. Connect using an RJ-45 cable. Make sure the 

192.168.0.100 IP is compatible with your LAN.

Summary of Contents for DIN Relay 4
















Reviews: