Assemble the System
Installation Steps
4
Preproofer
–
HW Installation manual
4-21
Preproofer IM749
8-12 EN
46.)
Route the cables for the Lower printer through the
cable channel as shown.
47.)
Connect the 9 pin serial cable to the connector on the
Interface Box.
(1)
Connect to Power Supply
(2)
Serial Cable
48.)
Attach serial cable from COM1 port of the PC to the
Epson interface Box.
49.)
Connect the Power Supply cable.The red lamp on the
underside of the Interface Box will be lit. Minimum of
12 V supply is required for the lamp to be lit. The
power supply should be able to deliver minimum of
1.5A.
(1)
Red lamp
1
1
1
