Assemble the System
Installation Steps
4
Preproofer
–
HW Installation manual
4-11
Preproofer IM749
8-12 EN
20.)
Insert the upper media deflector and fix it with
replacement screws M4 x 10 mm. The guide plate on
the deflector is gently inserted behind the ink hoses
carrier plate. The upper edge of the guide plate
should rest under the edge of the vacuum bed.
(1)
Vacuum bed edge
(2)
Guide plate underneath the vacuum bed edge
(3)
Ink Hoses carrier plate
21.)
Tighten the M4 x 10 mm screws on each side.
(1)
M4 x 10 mm screws
(2)
Height adjustment screw
Check the upper edge of the guide plate rests
under the edge of the vacuum bed!
22.)
The guide plate can be adjusted upwards or
downwards by unlocking and tightening the Height
adjustment screw on each side with spanner # 7 or
wrench. Adjust with the position half way.
1
1
1
1
1
1
