Function test
Installation Steps
5
Preproofer
–
HW Installation manual
5-1
Preproofer IM749
8-12 EN
5
Function test
Before installing and configuring the software components, test the system like:
1)
Copy the file shufflebox.zip from the installation CD, located in the directory “\Products\Preproofer\utilities”,
to the desktop. Unzip it and start the program EPS100605.exe.
2)
PRINTER FRONT
Set on the control panel to “Roll paper cut”
3)
PRINTER BACK
Set on the control panel the paper to “Sheet”
4)
PRINTER FRONT
Load the 6” paper roll on the top printer
5)
PRINTER FRONT
On the control panel, press the paper feed button to forward about 60cm paper.
6)
PRINTER FRONT
Press the button paper cut.
7)
Paper should fall into
PRINTER BACK.
On the display the message
“Press PAUSE button”
comes up. The
paper indicator, a
RED LED
, goes off.
8)
Software EPS100605
Press the button
PAUSE
. The paper starts to shuffle (goes up and down 4 times).
After the shuffling process, the paper is automatically loaded into the printer. On the display of
PRINTER
BACK
the message
“READY”
comes up.
9)
PRINTER BACK
Press the paper feed forward button. The paper is transported out. At the end, the
message
“Paper out”
is displayed at the control panel
10)
Software EPS100605
Press the button
ENTER
. The sheet paper is released and falls into the bin.
If steps 1 to 10 are successful, continue with the software installation
