Configuring the Module in a DEChub ONE 5-1
Chapter 5
Configuring the Module in a DEChub ONE
Overview
Introduction
This chapter describes how to configure your DIGITAL VNswitch 900FF module
when it is installed in a DEChub ONE docking station.
For further configuration information, refer to DIGITAL VNswitch 900 Series Switch
Management.
In This Chapter
Topic
Page
Assigning an IP Address
5-2
Using Menus to Configure the Module
5-3
[1] Restart with Factory Defaults
5-4
[2] Restart with Current Settings
5-5
[3] Show Current Settings
5-6
[4] Configure IP
5-7
[5] Go to Local Console
5-12
[6] Product-Specific Options
5-13
