Configuring the Module in a DIGITAL MultiSwitch 900 6-5
Using Menus to Configure the Module
Using Menus to Configure the Module
The following screen shows the options available from the
VNswitch 900FF
INSTALLATION MENU
when the module is operating in a MultiSwitch 900
configuration. Depending on the configuration state of the module, some options may
vary.
Note that when your module is installed in the MultiSwitch 900, the slot number where
the module is installed appears at the top of the menu.
VNswitch 900FF - slot 3
======================================================
VNswitch 900FF INSTALLATION MENU
[1] Restart with Factory Defaults
[2] Restart with Current Settings
[3] Show Current Settings
[4] Configure IP
[5] Go to Local Console
[Ctrl/C] Return to Chassis Manager Installation Menu
======================================================
Enter selection: 5 <Return>
[6] Product-Specific Options...
