Installing the DIGITAL VNswitch 900FF 3-9
How to Install the Module
Task 2: Seat the Module
To seat the module into the DIGITAL MultiSwitch 900 (Figure 3-4), complete the
following steps:
Figure 3-4: Seating the Module
Step
Action
1
Place the module’s mounting tab (1) into a mounting slot on the
DIGITAL MultiSwitch 900.
2
Pull up on the release lever (2) to its unlocked position.
3
Pivot the module on the mounting tab, align the connectors, and firmly
push the module onto the backplane connectors.
4
Press down on the release lever (3) to ensure that it is locked.
NPB-0004-95F
3
2
1
