Configuring the Module in a DIGITAL MultiSwitch 900 6-13
[4] Configure IP
[4] Set Default Gateway
This option prompts you to set the default gateway, if necessary. This is the address
the module uses when communicating with a remote host. The default gateway address
must be in the same subnet as your in-band address.
The following example shows the dialog associated with this option:
===========================================================
SET IN-BAND INTERFACE DEFAULT GATEWAY ADDRESS
example: 16.20.40.156
To delete the address, enter 0 in the appropriate
address field.
===========================================================
Default Gateway [] : 16.126.16.254 <Return>
Default Gateway Address Set.
Press Return for IP Configuration Menu...
Format: The standard 4 octet dotted decimal notation in which
octet of the address is represented as a decimal
by a ’.’ character.
each
value, separated
VNswitch 900FF
- slot 3
