Chapter 3. IBM AIX
EK–SM410–UP. A01
3–7
3.2.4 Record Mount Points
In the following mount point table, record the output of the command:
# lsvg -o | lsvg -i -l
Table 3–3 Mount Points
VOLUME GROUP NAME
LV NAME
MOUNT POINT
3.2.5 Shutdown the System
Shutdown the operating system using your normal procedure. Once the system has
halted, power it OFF.
3.3
Making a Serial Connection with the RAID Controller
You must make a serial connection to the RAID controller to access the Command Line
Interpreter (CLI). The CLI is the user interface built into the RAID controller. It provides
a series of commands for you to create a configuration for the subsystem through the
controller’s software.
Refer to the SWXRC–04 RAID Array Controller User’s Guide for detailed descriptions
of all CLI commands.
You can make a serial connection to the RAID controller from a maintenance terminal or
a PC.
