If you do not enter the correct password, the system displays the
following message.
User authorization failure
If you forget your password, follow the instructions for breaking into
the system given in
Guide to Setting Up a VMS System
.
8. You should now perform the following operations.
• Register any PAKs you received with your system.
• Back up the system disk.
• Delete unwanted files.
To register PAKs:
$
@SYS$UPDATE:VMSLICENSE
Return
If you make a mistake while entering a PAK:
1. Continue the data entry sequence.
2. Reject the data at the end of the sequence when your system asks you
to confirm the data.
Your system then gives you an opportunity to reenter the data correctly.
See the
VMS License Management Utility Manual
for any additional
information you may need.
Your system
Operation
manual provides information on backing up the
system disk and deleting unwanted files. Read carefully to determine the
exact sequence of backup and tailoring functions needed, based on the
amount of tailoring required and the backup resources available to you.
See the
VMS Installation and Operations Manual
for more information
on entering PAKs, customizing and testing your system, startup and
shutdown, and backup procedures.
Later you can use the NETCONFIG.COM and CLUSTER_CONFIG.COM
command procedures to include your system in a network and cluster,
provided you have the appropriate software licenses and PAKs. See the
VMS VAXcluster Manual
, the
Guide to DECnet–VAX Networking
, and the
VMS Networking Manual
for more information.
A–6
VAX 4000 Model 200 (BA430)
