NOTE:
If you are installing an expander with your system, for alternate
configurations refer to your Dual Host Systems manual. If you want to
renumber the system ISEs, refer to your Operation manual.
For ease of discussion, call one of the systems host A, the other host B.
1. Remove the DSSI terminator from the host A DSSI In/Out connector
shown in Figure 41. Squeeze the spring clips at the top and bottom of
the terminator as you pull it straight out.
Figure 41:
Removing the DSSI Terminators
Host A
MLO-005573
Host B
2. Repeat the previous step for host B.
3. Find the 2.74-meter (9-foot) DSSI cable labeled BC21M–09, shipped
with your system.
60
VAX 4000 Model 200 (BA430) Installation
