NOTE:
Contact your network manager or Digital service representative if
you have questions about network configurations.
7.7 Connecting to an Ethernet Network at the DESQA
Module
If your DESQA module does not have an Ethernet Connector switch
(Figure 24):
• If you want to connect to ThinWire Ethernet, go to Section 7.7.1.
• If you want to connect to standard Ethernet, call your Digital service
representative.
If your DESQA module has an Ethernet Connector switch, you must select
a ThinWire or a standard connector:
• To select the ThinWire connector, set that switch to the out position.
Then go to Section 7.7.1.
• To select the standard connector, set that switch to the in position. Then
go to Section 7.7.2.
An indicator next to the selected connector lights when your system is
turned on, indicating an active connection.
VAX 4000 Model 200 (BA430) Installation
39
