Digital Equipment 3100R Series, Service Maintenance Manual, Page: 36 / 174

Server Software and Utilities
2-13
D
IG
IT
A
L
S
er
ve
r
310
0R
/3
20
0R
To run the diagnostics from the DOS partition, perform the following:
1. Boot the server and select MS-DOS from the boot menu.
2. At the MS-DOS prompt, type:
C:\diag\diagnose.bat
3. Select MS-DOS again and the diagnostics will load. Once the diagnostics
begin, the main menu appears.
To create the diagnostic diskettes from the Quick Launch CD-ROM, perform the
following:
1. Insert the Quick Launch CD-ROM into the drive and boot the server or from
a PC or workstation, use Windows File Manager or Explorer and run:
<cd-rom>:\QLAUNCH.EXE.
2. From the Quick Launch main menu, select Installations & Utilities.
3. Select the Utilities tab and then select the server model.
4. Insert a blank MS-DOS formatted diskette into drive A and select
Diagnostics.
5. Select Continue. Afterwards, remove the diskette for safekeeping.
6. Choose the next diagnostic diskette from the list and then select Continue.
Create all the diskettes labeled “Diagnostics.”