Digital Equipment 3100R Series, Service Maintenance Manual

Page: 113 / 174

FRU Replacement
5-38
Server SIMMs Requirements
Supported SIMMs 36-bit SIMMs, 60 ns access time, EDO or
Fast-Page memory
Supported densities 32, 64, or 128 MB of EDO or Fast-Page
memory (refer to the memory configuration
guidelines for additional information)
Minimum server memory supported 64 MB
Maximum server memory
supported 1 GB
Memory Configuration Guidelines
NOTE: Before you begin, create a SCU diskette using
Quick Launch. You must run the SCU after installing any
memory upgrade. This allows the server to recognize
the new memory configuration.
The memory configuration guidelines for
the
DIGITAL Server are as follows:
•
Each memory bank on the processor module must contain two SIMMs
which must be the same size and type.
•
Install memory starting at Bank 0, then Bank 1, then Bank 2, and Bank 3
last.
•
Add SIMMs in multiples of two to fill up a bank.
•
EDO and Fast-Page memory can be mixed by bank only.