Digital Electronics Corporation Pro-Face PL-6900 Series, User Manual

Page: 65 / 105

System Setup
5 - 4
PL-6900 Series User Manual
Selecting the BIOS FEATURES SETUP menu item calls up the following
screen.
2 BIOS FEATURES SETUP
Virus Warning
CPU Internal Cache
External Cache
Quick Power On Self Test
Boot Sequence
Boot Up Floppy Seek
Boot Up NumLock Status
Boot Up System Speed
Gate A20 Option
Memory Parity/ECC Check
Typematic Rate Setting
Typematic Rate(Chars/Sec)
Typematic Delay (Msec)
Security Option
PCI/VGA Palette Snoop
OS Select For DRAM > 64MB
Video BIOS Shadow : Enabled
C8000-CBFFF Shadow : Disabled
CC000-CFFFF Shadow : Disabled
D0000-D3FFF Shadow : Disabled
D4000-D7FFF Shadow : Disabled
D8000-DBFFF Shadow : Disabled
DC000-DFFFF Shadow : Disabled
:Disabled
:Enabled
:Enabled
:Enabled
:A,C,SCSI
:Enabled
:On
:High
:Fast
:Enabled
:Disabled
:6
:250
:Setup
:Disabled
:Non-OS2
ROM PCI/ISA BIOS(2A5LEU1C)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
ESC :Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Virus Warning
Designates whether a warning message appears when an error
occurs during a write to the Hard Disk's Boot Sector. The two
selections are[Disabled] and [Enabled]. The [Disabled] selection is
factory set and recommended for most users.
CPU Internal Cache
Designates if the CPU's Internal Cache Memory is used or not. The
two selections available are [Disabled] and [Enabled]. The
[Enabled] selection is factory set and recommended for most users.
External Cache
Designates if the CPU's External Cache Memory (L2) is used or
not. The two selections available are [Disabled] and [Enabled]. The
[Enabled] selection is factory set and recommended for most users.
Quick Power On Self Test
Designates if a simplified Self Test is used after the power is
turned ON. The two selections available are [Disabled] and
[Enabled]. The [Enabled] selection is factory set and recommended
for most users.
Boot Sequence
Designates the drive order used by the OS during start up.
The [A,C,SCSI] is factory set and recommended for most users.
The other available settings are [A,C,SCSI], [C,A,SCSI],
[C,CDROM,A], [CDROM,C,A], [D,A,SCSI], [SCSI, A,C,],
[SCSI,C,A] and [C Only].