Digital Electronics Corporation Pro-Face PL-6900 Series, User Manual, Page: 21 / 105

1 - 4 PL-6900 Series User Manual
Overview
<Expansion Slot’s Width and Power Supply>
• Check that your expansion board’s “foot” matches the width of the
expansion slot. Slot 1 (slot 1 and 4 for PL-6900T) is 20 mm wide, and
slot 2 (slot 2 and 3 for PL-6900T) is 25 mm wide. Be sure the width of
your expansion board’s width matches that of the intended slot.
<Power Supply>
• Since the PL does not supply -5 and -12 V current, ISA(AT)-bus compat-
ible boards requiring -5 or -12 V can be used only if the optional PL-
PW100 power supply is installed.
<Commercially Available Boards>
• Certain commercially available boards may not be compatible with
Digital’s PL unit. Installing incompatible boards may result in either
damage to or failure of the PL and will void your warranty. Prior to
using those boards, be sure to contact your local PL distributor.
<PCI Bus>
• Within the entire range of PCI buses currently available on the market,
there may be certain devices which will not operate when used with the
PL. Prior to the use of any PCI Bus, be sure to contact your local PL
distributor.
<Main Memory>
• Be sure to use only DIM modules manufactured by Digital. Installing
other DIM modules may result in either damage to or failure of the PL,
and will void your warranty.
<When using Standard PC Peripheral Devices>
• Within the range of peripheral devices currently available on the market,
there may be certain devices which will not operate correctly when used
with the PL. Prior to using any peripheral device, be sure to contact your
local PL distributor. Installing incompatible boards may result in either
damage to or failure of the PL and will void your warranty.