Digital Electronics Corporation Pro-Face PL-6900 Series, User Manual, Page: 54 / 105

4 - 3
PL-6900 Series User Manual
Installation and Wiring
1 Installation Procedures
Follow the steps given below when installing the PL.
4-2 Installing the PL
Attaching the Moisture Resistant Gasket
PL Rear Face
Gasket
Even if the your PL’s Moisture Resistant Gasket is not needed to prevent water
from entering the unit, the gasket also acts as a vibration absorber and should
always be attached. To install it, place the PL face down on a soft surface and
attach the gasket to the rear side of the display face, in the plastic bezel’s groove
(see picture below).
Before mounting the PL into a cabinet or panel, check that the moisture
resistant gasket is attached to the unit.
Create a hole for mounting the PL, like that pictured here. Two additional items,
the moisture resistant gasket and the mounting brackets are also required when
installing the PL.
2-5 PL Dimensions
Create an Installation Slot
> <
1.6 - 10.0 mm
> <
• To obtain the maximum degree of moisture resistance, be sure to mount the PL on a
smooth, flat surface.
• The panel itself can be from 1.6 to 10.0 mm thick.
Panel
Mounting hole
Strengthening may be required for the panel. Be sure to consider the weight
of the PL when designing the panel.